Fanuc Alarm 5212: SCREEN COPY: PARAMETER ERROR
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
There is a parameter setting error. Check that 4 is set as the I/O channel.
Have you faced Fanuc Alarm 5212 SCREEN COPY: PARAMETER ERROR on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 5435: PARAMETER OUT OF RANGE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Incorrect parameter setting (set value range) Have you faced Fanuc Alarm 5435 PARAMETER OUT OF RANGE on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators…
Fanuc Alarm 5229: WRITE PROTECTED Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A floppy disk in the built–in Handy File is write protected. Have you faced Fanuc Alarm 5229 WRITE PROTECTED on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC…
Fanuc Alarm 5436: PARAMETER SETTING ERROR 1 Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Incorrect parameter setting (setting of the rotation axis) Have you faced Fanuc Alarm 5436 PARAMETER SETTING ERROR 1 on your machine? Share your experience or troubleshooting tips in the comments below to help other…
Fanuc Alarm 4543: MULTI-PIECE Q COMMAND ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Although G98P0 was specified, the Q value for the G74 command was not 1 or 3. Although G98K0 was specified, the Q value for the G73 command was not 1 or 2. Have…
Fanuc Alarm 213: ILLEGAL COMMAND IN SYNCHRO–MODE Fanuc Control Model: Series 0i / 0i-Mate,16 / 18 / 21-Series, 160i/180i/210i and 30i/31i/32i Fanuc Alarm Description Movement is commanded for the axis to be synchronously controlled. Any of the following alarms occurred in the operation with the simple synchronization control.;1) The program issued the move command to…
Fanuc Alarm 5219: CAN NOT RETURN Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Manual intervention or return is not allowed during three–dimensional coordinate conversion. Have you faced Fanuc Alarm 5219 CAN NOT RETURN on your machine? Share your experience or troubleshooting tips in the comments below to help…