Fanuc Alarm 5229: WRITE PROTECTED
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
A floppy disk in the built–in Handy File is write protected.
Have you faced Fanuc Alarm 5229 WRITE PROTECTED on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 65: ILLEGAL COMMAND IN G71–G73 Fanus Control Model: 16/18/21 Fanuc Alarm Description T Series;1. G00 or G01 is not commanded at the block with the sequence number which is specified by address P in G71, G72, or G73 command. 2. Address Z(W) or X(U) was commanded in the block with a sequence number…
Fanuc Alarm 5198: FSSB: ID DATA NOT READ Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Temporary assignment failed, so amplifier initial ID information could not be read. Have you faced Fanuc Alarm 5198 FSSB: ID DATA NOT READ on your machine? Share your experience or troubleshooting tips in…
Fanuc Alarm 5115: SPL: ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description There is an error in the specification of the rank. No knot is specified. The knot specification has an error. The number of axes exceeds the limits. Other program errors Have you faced Fanuc Alarm…
Haas Alarm: 187 B SERVO ERROR TOO LARGE – Lathe Haas Alarm Description Too much load or speed on B-axis motor. The difference between the motor position and the commanded position has exceeded a parameter. The motor may also be stalled, disconnected, or the driver failed. The servos will be turned off and a Reset…
Fanuc Alarm 5432: G02.4/G03.4 FORMAT ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A three–dimensional circular interpolation command (G02.4/G03.4) is incorrect. Have you faced Fanuc Alarm 5432 G02.4/G03.4 FORMAT ERROR on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators…
Fanuc Alarm 4532: IMPROPER U/V MACRO NUMBER Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The number of an inhibited macro (number beyond the range from 01 to 99) was specified in a U or V macro command. Have you faced Fanuc Alarm 4532 IMPROPER U/V MACRO NUMBER on…