Fanuc Alarm 66: IMPROPER G–CODE IN G71–G73
Fanus Control Model: 16/18/21
Fanuc Alarm Description
T Series;An unallowable G code was commanded between two blocks specified by address P in G71, G72, or G73. Modify the program.
Fanuc Alarm PS017 ILLEGAL MODE FOR GOTO/WHILE/DO Fanus Control Model: 10/11/12/15/15i Description This alarm appears when the control system has difficulty executing these macro statements such as GOTO, WHILE, or DO. Does your CNC controller accept these specific commands or is there a fundamental error in the program logic that violates the prevailing rules of…
Fanuc Alarm PS058: S–COMMAND OUT OF RANGE Fanus Control Model: 0i-D/F series, 16i/18i/21i, and the 30i/31i/32i series. Description If a spindle speed is written in the program that exceeds the machine’s operating capacity, the system will immediately stop the operation and an alarm will appear on the screen. How to Fix Alarm Check the S…
Fanuc Alarm 86: DR SIGNAL OFF Fanus Control Model: Fanuc 16, 18, and 21 Series (including i-series), Fanuc 0/0i Series (0-M, 0-T, 0i-MA, 0i-TB, 0i-MC, etc.) Description This simply means that the controller is not receiving a “Data Set Ready” (DSR) signal from the external device PC or laptop. This problem mostly occurs when you…
Fanuc Alarm 14: ILLEGAL LEAD COMMAND Fanuc Series 0i (0i-TC, 0i-TD, 0i-TF) Fanuc Series 16i / 18i / 21i Fanuc Series 30i / 31i / 32i Description The wrong feed rate and lead limit of the (Threading) process is higher or lower than the limit set in the program, or there is an error in…
Fanuc Alarm 11: NO FEEDRATE COMMANDED Fanus Control Model: 16/18/21 Fanuc Alarm Description Feedrate was not commanded to a cutting feed or the feedrate was inadequate. Modify the program.
Fanuc Alarm 22: NO CIRCULAR RADIUS Fanus Control Model: 16/18/21 Fanuc Alarm Description When circular interpolation is specified, neither R (specifying an arc radius), nor I, J, and K (specifying the distance from a start point to the center) is specified.