Fanuc Alarm 5135: FSSB: ERROR MODE
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
FSSB has entered error mode.
Have you faced Fanuc Alarm 5135 FSSB: ERROR MODE on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 5257: G41/G42 NOT ALLOWED IN MDI MODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description M series;G41/G42 (cutter compensation C: M series) was specified in MDI mode. (Depending on the setting of bit 4 of parameter No. 5008) Have you faced Fanuc Alarm 5257 G41/G42 NOT…
Fanuc Alarm 5113: CAN NOT ERROR IN MDI MODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Look–ahead control (multi blocks are read in advance) (G05.1) was specified in MDI mode. Have you faced Fanuc Alarm 5113 CAN NOT ERROR IN MDI MODE on your machine? Share your experience…
Fanuc Alarm 5000: ILLEGAL COMMAND CODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The specified code was incorrect in the high–precision contour control (HPCC) mode. Have you faced Fanuc Alarm 5000 ILLEGAL COMMAND CODE on your machine? Share your experience or troubleshooting tips in the comments below to…
Fanuc Alarm 5036: ADDRESS R NOT DEFINED IN G81–G86 Fanuc Control Model: 0i-T (such as 0i-TB, 0i-TC), 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description T series Point R was not specified for the canned cycle for the B–axis. Have you faced Fanuc Alarm 5036 ADDRESS R NOT DEFINED IN G81–G86 on…
Fanuc Alarm 5138: FSSB: AXIS SETTING NOT COMPLETE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In automatic setting mode, axis setting has not been made yet. Perform axis setting on the FSSB setting screen. Have you faced Fanuc Alarm 5138 FSSB: AXIS SETTING NOT COMPLETE on your machine?…
Fanuc Alarm 5421: ILLEGAL COMMAND IN G43.4/ G43.5 Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In pivot tool length compensation (type 2) mode, a rotation axis is specified. Have you faced Fanuc Alarm 5421 ILLEGAL COMMAND IN G43.4/ G43.5 on your machine? Share your experience or troubleshooting tips…