Fanuc Alarm 6: ILLEGAL USE OF NEGATIVE SIGN
Fanus Control Model: 16/18/21
Fanuc Alarm Description
Sign “ – ” input error (Sign “ – ” was input after an address with which it cannot be used. Or two or more “ – ” signs were input.) Modify the program.
Fanuc Alarm 70: NO PROGRAM SPACE IN MEMORY Fanus Control Model: 16/18/21 Fanuc Alarm Description The memory area is insufficient. Delete any unnecessary programs, then retry.
Fanuc Alarm 63: SEQUENCE NUMBER NOT FOUND Fanus Control Model: 16/18/21 Fanuc Alarm Description T Series;The sequence number specified by address P in G70, G71, G72, or G73 command cannot be searched. Modify the program.
Fanuc Alarm PS891: ILLEGAL COMMAND G05 Fanus Control Model: Series 15 control (including Series 15-MA, 15-TA, 15-MF, and 15-TF). Description When the G05 command is written incorrectly in the program or the controller detects a technical error in the use of the G05 command. One reason for this alarm is that the G05 command is…
Fanuc Alarm 21: ILLEGAL PLANE AXIS COMMANDED Fanus Control Model: 16/18/21 Fanuc Alarm Description An axis not included in the selected plane (by using G17, G18, G19) was commanded in circular interpolation. Modify the program.
Fanuc Alarm 2: TV PARITY ALARM Fanus Control Model: 16/18/21 Fanuc Alarm Description TV alarm (The number of characters in a block is odd). This alarm will be generated only when the TV check is effective.
Fanuc Alarm 85: COMMUNICATION ERROR Fanus Control Model: Series 16, 18, 21 (including i-Series) Description This alarm appears when there is an interruption in data transmission between the controller and an external device (such as PC or USB). This alarm indicates that while you were loading or downloading a program, an “Overrun,” “Framing,” or “Parity”…