Fanuc Alarm 5411: NURBS:ILLEGAL ORDER
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
The number of steps is specified incorrectly.
Have you faced Fanuc Alarm 5411 NURBS:ILLEGAL ORDER on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm PS891: ILLEGAL COMMAND G05 Fanus Control Model: Series 15 control (including Series 15-MA, 15-TA, 15-MF, and 15-TF). Description When the G05 command is written incorrectly in the program or the controller detects a technical error in the use of the G05 command. One reason for this alarm is that the G05 command is…
Fanuc Alarm 5036: ADDRESS R NOT DEFINED IN G81–G86 Fanuc Control Model: 0i-T (such as 0i-TB, 0i-TC), 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description T series Point R was not specified for the canned cycle for the B–axis. Have you faced Fanuc Alarm 5036 ADDRESS R NOT DEFINED IN G81–G86 on…
Fanuc Alarm 5096: MISMATCH WAITING M–CODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Different wait codes (M codes) were specified in HEAD1 and HEAD2. Correct the program. Have you faced Fanuc Alarm 5096 MISMATCH WAITING M–CODE on your machine? Share your experience or troubleshooting tips in the comments…
Fanuc Alarm 5402: SPL:ILLEGAL AXIS MOVING Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A movement is made along an axis that is not the spline interpolation axis. For example, in three–dimensional tool compensation mode using an offset vector of which components are the X–, Y–, and Z–axes,…
Fanuc Alarm 5074: ADDRESS DUPLICATION ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The same address has been specified two or more times in a single block. Alternatively, two or more G codes in the same group have been specified in a single block. Have you faced…
Fanuc Alarm 118: PARENTHESIS NESTING ERROR Fanus Control Model: 16/18/21 Fanuc Alarm Description The nesting level of brackets or parentheses in a macro expression exceeds the limit of 5 levels.