Fanuc Alarm 5038: TOO MANY START M–CODE COMMAND
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
T series
More than six M codes for starting movement about the B–axis were specified.
Have you faced Fanuc Alarm 5038 TOO MANY START M–CODE COMMAND on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 62: ILLEGAL COMMAND IN G71–G76 Fanus Control Model: 16/18/21 Fanuc Alarm Description T Series;1. The depth of cut in G71 or G72 is zero or negative value. 2. The repetitive count in G73 is zero or negative value. 3. the negative value is specified to Δi or Δk is zero in G74 or…
Fanuc Alarm 1: TH PARITY ALARM Fanuc Control Model: Fanuc 0i, 16/18/21, 16i/18i/21i, 30i/31i/32i Fanuc Alarm 1 (TH Parity Alarm) is a Program / RS-232 Communication alarm that occurs when the CNC control detects an incorrect number of holes (odd/even parity error) while reading a tape or receiving a G-code program via serial communication. Follow…
Fanuc Alarm 5307: INTERNAL DATA OVER FLOW Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In the following function, internal data exceeds the allowable range.;1) Improvement of the rotation axis feedrate Have you faced Fanuc Alarm 5307 INTERNAL DATA OVER FLOW on your machine? Share your experience or troubleshooting…
Fanuc Alarm 5433: MANUAL INTERVENTION IN 3–D CIR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In three–dimensional circular interpolation mode (G02.4/G03.4), manual intervention was made when the manual absolute switch was on. Have you faced Fanuc Alarm 5433 MANUAL INTERVENTION IN 3–D CIR on your machine? Share your…
Fanuc Alarm 5212: SCREEN COPY: PARAMETER ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description There is a parameter setting error. Check that 4 is set as the I/O channel. Have you faced Fanuc Alarm 5212 SCREEN COPY: PARAMETER ERROR on your machine? Share your experience or troubleshooting tips…
Fanuc Alarm 3: TOO MANY DIGITS Fanus Control Model: 16/18/21 Fanuc Alarm Description Data exceeding the maximum allowable number of digits was input. (Refer to the item of max. programmable dimensions.)