Fanuc Alarm 5034: PLURAL COMMAND IN G110
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
T series
Multiple movements were specified with the G110 code for the B–axis.
Have you faced Fanuc Alarm 5034 PLURAL COMMAND IN G110 on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm PS900: G72.1 NESTING ERROR Fanus Control Model: Series 15i, 16i, 18i, 21i, and 30i/31i/32i Description This alarm appears when the “G72.1” (Subprogram Call for Figure Copy) command is used incorrectly in CNC programming. The main reason for this alarm is exceeding the “Nesting” limit, that is, when you call several subprograms consecutively within…
Fanuc Alarm 5137: FSSB: CONFIGURATION ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description FSSB detected a configuration error. Have you faced Fanuc Alarm 5137 FSSB: CONFIGURATION ERROR on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear…
Fanuc Alarm 5401: SPL:ILLEGAL COMMAND Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In a G code mode in which specification of G06.1 is not permitted, G06.1 is specified. Have you faced Fanuc Alarm 5401 SPL:ILLEGAL COMMAND on your machine? Share your experience or troubleshooting tips in the comments…
Fanuc Alarm 69: FORMAT ERROR IN G70–G73 Fanus Control Model: 16/18/21 Fanuc Alarm Description T Series;The final move command in the blocks specified by P and Q of G70, G71, G72, and G73 ended with chamfering or corner R. Modify the program.
Fanuc Alarm 5036: ADDRESS R NOT DEFINED IN G81–G86 Fanuc Control Model: 0i-T (such as 0i-TB, 0i-TC), 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description T series Point R was not specified for the canned cycle for the B–axis. Have you faced Fanuc Alarm 5036 ADDRESS R NOT DEFINED IN G81–G86 on…
Fanuc Alarm 400: SERVO ALARM: n–TH AXIS OVERLOAD Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The n–th axis (axis 1–4) overload signal is on. Refer to diagnosis display No. 200, 201 for details. Have you faced Fanuc Alarm 400 SERVO ALARM: n–TH AXIS OVERLOAD on your machine? Share…