Fanuc Alarm 4538: W NO. NOT FOUND IN MULTI-PIECE

Fanuc Alarm 5053: M–NET CONNECT ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Connection time monitoring error (parameter No. 175) Have you faced Fanuc Alarm 5053 M–NET CONNECT ERROR on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and…

Fanuc Alarm 5245: OTHER AXIS ARE COMMANDED Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description One of the following command conditions was present during flexible synchronization or when flexible synchronization was turned on;1. The synchronous master axis or slave axis is the EGB axis.;2. The synchronous master axis…

Fanuc Alarm 5252: ILLEGAL P COMMAND IN G54.2 Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The P value specifying the offset number of a fixture offset is too large. Correct the program. Have you faced Fanuc Alarm 5252 ILLEGAL P COMMAND IN G54.2 on your machine? Share your…

Fanuc Alarm 5046: ILLEGAL PARAMETER (ST.COMP) Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The parameter settings for straightness compensation contain an error. Possible causes are as follows;1. A parameter for a movement axis or compensation axis contains an axis number which is not used.;2. More than 128…

Fanuc Alarm 4530: A/B MACRO NUMBER ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The number for storing and calling by an A or B macro was set to a value beyond the range from 1 to 5. Have you faced Fanuc Alarm 4530 A/B MACRO NUMBER…