Fanuc Alarm 25: CANNOT COMMAND F0 IN G02/G03
Fanuc Alarm 25: CANNOT COMMAND F0 IN G02/G03
Fanus Control Model: 16/18/21
Fanuc Alarm Description
F0 (fast feed) was instructed by F1 –digit column feed in circular interpolation. Modify the program.
Similar Posts
Fanuc Alarm 214: ILLEGAL COMMAND IN SYNCHRO–MODE
Fanuc Alarm 214: ILLEGAL COMMAND IN SYNCHRO–MODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Coordinate system is set or tool compensation of the shift type is executed in the synchronous control. Correct the program. Have you faced Fanuc Alarm 214 ILLEGAL COMMAND IN SYNCHRO–MODE on your machine? Share…
Fanuc Alarm 5401: SPL:ILLEGAL COMMAND
Fanuc Alarm 5401: SPL:ILLEGAL COMMAND Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In a G code mode in which specification of G06.1 is not permitted, G06.1 is specified. Have you faced Fanuc Alarm 5401 SPL:ILLEGAL COMMAND on your machine? Share your experience or troubleshooting tips in the comments…
Fanuc Alarm 5117: SPL: ERROR
Fanuc Alarm 5117: SPL: ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The first control point of NURBS is incorrect. Have you faced Fanuc Alarm 5117 SPL: ERROR on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers…
Fanuc Alarm 5300: SET ALL OFFSET DATAS AGAIN
Fanuc Alarm 5300: SET ALL OFFSET DATAS AGAIN Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description After the inch/metric automatic conversion function (OIM: Bit 0 of parameter No. 5006) for tool offset data is enabled or disabled, all the tool offset data must be reset. This message reminds…
Fanuc Alarm 5420: ILLEGAL PARAMETER IN G43.4/ G43.5
Fanuc Alarm 5420: ILLEGAL PARAMETER IN G43.4/ G43.5 Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A parameter related to pivot tool length compensation is incorrect. Have you faced Fanuc Alarm 5420 ILLEGAL PARAMETER IN G43.4/ G43.5 on your machine? Share your experience or troubleshooting tips in the comments…
Fanuc Alarm 69: FORMAT ERROR IN G70–G73
Fanuc Alarm 69: FORMAT ERROR IN G70–G73 Fanus Control Model: 16/18/21 Fanuc Alarm Description T Series;The final move command in the blocks specified by P and Q of G70, G71, G72, and G73 ended with chamfering or corner R. Modify the program.