Fanuc Alarm 5007: TOO LARGE DISTANCE
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
In the HPCC mode, the machine moved beyond the limit.
Have you faced Fanuc Alarm 5007 TOO LARGE DISTANCE on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 214: ILLEGAL COMMAND IN SYNCHRO–MODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Coordinate system is set or tool compensation of the shift type is executed in the synchronous control. Correct the program. Have you faced Fanuc Alarm 214 ILLEGAL COMMAND IN SYNCHRO–MODE on your machine? Share…
Fanuc Alarm 5416: NURBS:ILLEGAL MODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A mode that cannot be used with NURBS interpolation mode is specified in NURBS interpolation mode. Have you faced Fanuc Alarm 5416 NURBS:ILLEGAL MODE on your machine? Share your experience or troubleshooting tips in the comments…
Fanuc Alarm 225: SYNCHRONOUS/MIXED CONTROL ERROR Fanuc Control Model: 16i / 18i / 21 , 0i-T / 0i-TD , 30i / 31i – T series Fanuc Alarm Description T series (At two–path);This alarm is generated in the following circumstances. (Searched for during synchronous and mixed control command.;1 When there is a mistake in axis number…
Fanuc Alarm 5415: NURBS:ILLEGAL CANCEL Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Although NURBS interpolation is not completed yet, the NURBS interpolation mode is turned off. Have you faced Fanuc Alarm 5415 NURBS:ILLEGAL CANCEL on your machine? Share your experience or troubleshooting tips in the comments below to…
Fanuc Alarm 002: TV PARITY ALARM Fanus Control Model: 16i/18i/21i Description When a program is loaded into a CNC machine from a PC, laptop, or an old DNC device, the system checks the number of characters in each line and their order. If the TV Check parameter is turned on and the number of characters…
Fanuc Alarm 5123: OVER TOLERANCE OF END POINT Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The difference between a specified end point and the calculated end point exceeds the allowable range (parameter 3471). Have you faced Fanuc Alarm 5123 OVER TOLERANCE OF END POINT on your machine? Share…