Fanuc Alarm 5409: ILLEGAL PARAMETER IN G41.3

Fanuc Alarm 64: SHAPE PROGRAM NOT MONOTONOUSLY Fanus Control Model: 16/18/21 Fanuc Alarm Description T Series;A target shape which cannot be made by monotonic machining was specified in a repetitive canned cycle (G71 or G72).

Fanuc Alarm 124: MISSING END STATEMENT Fanuc Control Model: Fanuc 0i-D/F, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description DO – END does not correspond to 1: 1. Modify the program. Have you faced Fanuc Alarm 124 MISSING END STATEMENT on your machine? Share your experience or troubleshooting tips in the comments below to help other…

Fanuc Alarm 65: ILLEGAL COMMAND IN G71–G73 Fanus Control Model: 16/18/21 Fanuc Alarm Description T Series;1. G00 or G01 is not commanded at the block with the sequence number which is specified by address P in G71, G72, or G73 command. 2. Address Z(W) or X(U) was commanded in the block with a sequence number…

Fanuc Alarm 4537: ILLEGAL Q VALUE IN MULTI-PIECE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In the command for taking multiple workpieces (G73, G74), Q is set to a value beyond the range from 1 to 4. Have you faced Fanuc Alarm 4537 ILLEGAL Q VALUE IN…

Fanuc Alarm 23: ILLEGAL RADIUS COMMAND Fanus Control Model: 16/18/21 Fanuc Alarm Description (T series) In circular interpolation by radius designation, negative value was commanded for address R. Modify the program.