Fanuc Alarm 5197: FSSB: OPEN TIME OUT
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
The CNC permitted FSSB to open, but FSSB was not opened.
Have you faced Fanuc Alarm 5197 FSSB: OPEN TIME OUT on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 218: NOT FOUND P/Q COMMAND IN G251 (T series) Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm 218 is a Program/Software (P/S) alarm designated specifically for T series (Turning/Lathe) CNC control models. Fanuc Alarm Description T series P or Q is not commanded in the G251 block,…
Fanuc Alarm 4510: ILLEGAL COMMAND IN LINE-PUNCH Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In a linear punching (G45) command, the traveling distance was set to zero or a value 1.5 times larger than the tool size (P) or less. Alternatively, P was not specified. Have you…
Fanuc Alarm 415: SERVO ALARM: n–TH AXIS – EXCESS SHIFT Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A speed higher than 524288000 units/s was attempted to be set in the n–th axis (axis 1–8). This error occurs as the result of improperly set CMR. Have you faced…
Fanuc Alarm 130: ILLEGAL AXIS OPERATION Fanuc Control Model: Fanuc 0i-D/F, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description H code and automatic. Have you faced Fanuc Alarm 130 ILLEGAL AXIS OPERATION on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 5416: NURBS:ILLEGAL MODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A mode that cannot be used with NURBS interpolation mode is specified in NURBS interpolation mode. Have you faced Fanuc Alarm 5416 NURBS:ILLEGAL MODE on your machine? Share your experience or troubleshooting tips in the comments…
Fanuc Alarm 5422: EXCESS VELOCITY IN G43.4/ G43.5 Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description As a result of pivot tool length compensation, an attempt was made to move the tool along an axis at a feedrate exceeding the maximum cutting feedrate. Have you faced Fanuc Alarm…