Fanuc Alarm 5068: G31 FORMAT ERROR

Fanuc Alarm 5220: REFERENCE POINT ADJUSTMENT MODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A parameter for automatically set a reference position is set. (Bit 2 of parameter No. 1819 = 1) Perform automatic setting. (Position the machine at the reference position manually, then perform manual reference…

Fanuc Alarm 62: ILLEGAL COMMAND IN G71–G76 Fanus Control Model: 16/18/21 Fanuc Alarm Description T Series;1. The depth of cut in G71 or G72 is zero or negative value. 2. The repetitive count in G73 is zero or negative value. 3. the negative value is specified to Δi or Δk is zero in G74 or…

Fanuc Alarm 4520: T, M INHIBITED IN NIBBLING-MODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description T code, M code, G04, G70 or G75 was specified in the nibbling mode. Have you faced Fanuc Alarm 4520 T, M INHIBITED IN NIBBLING-MODE on your machine? Share your experience or troubleshooting…

Fanuc Alarm 5117: SPL: ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The first control point of NURBS is incorrect. Have you faced Fanuc Alarm 5117 SPL: ERROR on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers…

Fanuc Alarm 118: PARENTHESIS NESTING ERROR Fanus Control Model: 16/18/21 Fanuc Alarm Description The nesting level of brackets or parentheses in a macro expression exceeds the limit of 5 levels.

Fanuc Alarm 5417: NURBS:ILLEGAL MULTI–KNOT Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description As many knots as the number of steps are not specified at the start and end points. Have you faced Fanuc Alarm 5417 NURBS:ILLEGAL MULTI–KNOT on your machine? Share your experience or troubleshooting tips in the…