Fanuc Alarm 5041: CAN NOT COMMANDED G110 BLOCK

Fanuc Alarm 5195: DIRECTION CAN NOT BE JUDGED Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description When the touch sensor with a single contact signal input is used in the direct input B function for tool offset measurement values, the stored pulse direction is not constant. One of…

Fanuc Alarm 62: ILLEGAL COMMAND IN G71–G76 Fanus Control Model: 16/18/21 Fanuc Alarm Description T Series;1. The depth of cut in G71 or G72 is zero or negative value. 2. The repetitive count in G73 is zero or negative value. 3. the negative value is specified to Δi or Δk is zero in G74 or…

Fanuc Alarm 4504: ILLEGAL COMMAND IN ARC Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In an arc (G77) command, the radius (I) or the number of holes (K) was set to zero or a negative value. Alternatively, I, J, K, or P was not specified. Have you…

Fanuc Alarm 213: ILLEGAL COMMAND IN SYNCHRO–MODE Fanuc Control Model: Series 0i / 0i-Mate,16 / 18 / 21-Series, 160i/180i/210i and 30i/31i/32i Fanuc Alarm Description Movement is commanded for the axis to be synchronously controlled. Any of the following alarms occurred in the operation with the simple synchronization control.;1) The program issued the move command to…

Fanuc Alarm 219: COMMAND G250/G251 INDEPENDENTLY Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description T series G251 and G250 are not independent blocks. Have you faced Fanuc Alarm 219 COMMAND G250/G251 INDEPENDENTLY on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC…

Fanuc Alarm 5321: S–COMP. VALUE OVERFLOW Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The straightness compensation value has exceeded the maximum value of 32767.After this alarm is issued, make a manual reference position return. Have you faced Fanuc Alarm 5321 S–COMP. VALUE OVERFLOW on your machine? Share your…