Fanuc Alarm 4602: ILLEGAL T-CODE

Fanuc Alarm 23: ILLEGAL RADIUS COMMAND Fanus Control Model: 16/18/21 Fanuc Alarm Description (T series) In circular interpolation by radius designation, negative value was commanded for address R. Modify the program.

Fanuc Alarm 3: TOO MANY DIGITS Fanus Control Model: 16/18/21 Fanuc Alarm Description Data exceeding the maximum allowable number of digits was input. (Refer to the item of max. programmable dimensions.)

Fanuc Alarm 4650: IMPROPER G-CODE IN OFFSET MODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In the cutter compensation mode, an inhibited G code (pattern command, G73, G74, G75, etc.) was specified. Have you faced Fanuc Alarm 4650 IMPROPER G-CODE IN OFFSET MODE on your machine? Share your…

Fanuc Alarm 4532: IMPROPER U/V MACRO NUMBER Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The number of an inhibited macro (number beyond the range from 01 to 99) was specified in a U or V macro command. Have you faced Fanuc Alarm 4532 IMPROPER U/V MACRO NUMBER on…

Fanuc Alarm 5432: G02.4/G03.4 FORMAT ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A three–dimensional circular interpolation command (G02.4/G03.4) is incorrect. Have you faced Fanuc Alarm 5432 G02.4/G03.4 FORMAT ERROR on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators…

Fanuc Alarm 5051: M–NET CODE ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Abnormal character received (other than code used for transmission) Have you faced Fanuc Alarm 5051 M–NET CODE ERROR on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC…