Fanuc Alarm 65: ILLEGAL COMMAND IN G71–G73
Fanus Control Model: 16/18/21
Fanuc Alarm Description
T Series;1. G00 or G01 is not commanded at the block with the sequence number which is specified by address P in G71, G72, or G73 command. 2. Address Z(W) or X(U) was commanded in the block with a sequence number which is specified by address P in G71 or G72, respectively. Modify the program.
Fanuc Alarm PS123: Missing END Statement Fanus Control Model: Series 0i, 16i, 18i, 21i, and 30i/31i/32i controls Description When you forget to write END at the end of a program using commands like `WHILE` or `IF` in a macro program, the CNC system gets confused and generates an alarm. How to Fix Alarm Go into…
Fanuc Alarm 137: M-CODE & MOVE CMD IN SAME BLK Fanus Control Model: 0 (0-M, 0-T, 0-i) Description An M-code (which is a machine function such as spindle on/off or coolant control) and a ‘Move Command’ (such as X, Y, or Z axis movement) have been combined in a way that is prohibited by Fanuc…
Fanuc Alarm 14: CAN NOT COMMAND G95 / ILLEGAL LEAD COMMAND Fanus Control Model: 16/18/21 Fanuc Alarm Description (M Series) A synchronous feed is specified without the option for threading / synchronous feed. (T Series) In variable lead threading, the lead incremental and decremental outputted by address K exceed the maximum command value or a…
Fanuc Alarm 4 ADDRESS NOT FOUND Fanus Control Model: Series 0/00/0-Mate and Series 10/11/12 Description The controller encounters an ‘Address’ or ‘Word’ within the program that it cannot recognize. When writing G-code or M-code, selecting a letter or number that does not exist in the system of this machine. How to Fix Alarm Check for…
Fanuc Alarm 6: ILLEGAL USE OF NEGATIVE SIGN Fanus Control Model: 16/18/21 Fanuc Alarm Description Sign “ – ” input error (Sign “ – ” was input after an address with which it cannot be used. Or two or more “ – ” signs were input.) Modify the program.
Fanuc Alarm 10: IMPROPER G–CODE Fanus Control Model: 16/18/21 Fanuc Alarm Description An unusable G code or G code corresponding to the function not provided is specified. Modify the program.