Fanuc Alarm 64: SHAPE PROGRAM NOT MONOTONOUSLY
Fanus Control Model: 16/18/21
Fanuc Alarm Description
T Series;A target shape which cannot be made by monotonic machining was specified in a repetitive canned cycle (G71 or G72).
Fanuc Alarm 59: PROGRAM NUMBER NOT FOUND Fanus Control Model: 16/18/21 Fanuc Alarm Description In an external program number search, a specified program number was not found. Otherwise, a program specified for searching is being edited in background processing. Alternatively, the program with the program number specified in a one–touch macro call is not found…
Fanuc Alarm 029 (or PS029) ILLEGAL OFFSET VALUE Fanus Control Model: Series 21 / 21i (Model A, B, & C) and modern controls like the 30i / 31i / 32i series Description Any value in the Tool Offset or Work Offset that is outside the specified range of the machine. Fanuc parameters have a limit…
Fanuc Alarm 65: ILLEGAL COMMAND IN G71–G73 Fanus Control Model: 16/18/21 Fanuc Alarm Description T Series;1. G00 or G01 is not commanded at the block with the sequence number which is specified by address P in G71, G72, or G73 command. 2. Address Z(W) or X(U) was commanded in the block with a sequence number…
Fanuc Alarm 23: ILLEGAL RADIUS COMMAND Fanus Control Model: 16/18/21 Fanuc Alarm Description (T series) In circular interpolation by radius designation, negative value was commanded for address R. Modify the program.
Fanuc Alarm 14: ILLEGAL LEAD COMMAND Fanuc Series 0i (0i-TC, 0i-TD, 0i-TF) Fanuc Series 16i / 18i / 21i Fanuc Series 30i / 31i / 32i Description The wrong feed rate and lead limit of the (Threading) process is higher or lower than the limit set in the program, or there is an error in…
Fanuc Alarm 5: NO DATA AFTER ADDRESS Fanus Control Model: 16/18/21 Fanuc Alarm Description The address was not followed by the appropriate data but was followed by another address or EOB code. Modify the program.