Fanuc Alarm 73: PROGRAM NUMBER ALREADY IN USE

Fanuc Alarm 22: NO CIRCULAR RADIUS Fanus Control Model: 16/18/21 Fanuc Alarm Description When circular interpolation is specified, neither R (specifying an arc radius), nor I, J, and K (specifying the distance from a start point to the center) is specified.

Fanuc Alarm 4 ADDRESS NOT FOUND Fanus Control Model: Series 0/00/0-Mate and Series 10/11/12 Description The controller encounters an ‘Address’ or ‘Word’ within the program that it cannot recognize. When writing G-code or M-code, selecting a letter or number that does not exist in the system of this machine. How to Fix Alarm Check for…

Fanuc Alarm 72: TOO MANY PROGRAMS Fanus Control Model: 16/18/21 Fanuc Alarm Description The number of programs to be stored exceeded 63 (basic), 125 (option), 200 (option), or 400 (option) or 1000 (option). Delete unnecessary programs and execute program registration again.

This alarm appears in Fanuc control systems when a change has been made to the system’s memory or parameters that requires a restart of the machine to take effect. This is usually not a “fatal” fault, but rather an instruction to refresh the system. Fanus Control Model: This is one of the most direct and…

Fanuc Alarm PS900: G72.1 NESTING ERROR Fanus Control Model: Series 15i, 16i, 18i, 21i, and 30i/31i/32i Description This alarm appears when the “G72.1” (Subprogram Call for Figure Copy) command is used incorrectly in CNC programming. The main reason for this alarm is exceeding the “Nesting” limit, that is, when you call several subprograms consecutively within…

Fanuc Alarm PS891: ILLEGAL COMMAND G05 Fanus Control Model: Series 15 control (including Series 15-MA, 15-TA, 15-MF, and 15-TF). Description When the G05 command is written incorrectly in the program or the controller detects a technical error in the use of the G05 command. One reason for this alarm is that the G05 command is…