Fanuc Alarm 3: TOO MANY DIGITS

Fanuc Alarm 5196: ILLEGAL OPERATION (HPCC) Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Detach operation was performed in HPCC mode. (If detach operation is performed in HPCC mode, this alarm is issued after the currently executed block terminates.) Have you faced Fanuc Alarm 5196 ILLEGAL OPERATION (HPCC) on…

Fanuc Alarm 6: ILLEGAL USE OF NEGATIVE SIGN Fanus Control Model: 16/18/21 Fanuc Alarm Description Sign “ – ” input error (Sign “ – ” was input after an address with which it cannot be used. Or two or more “ – ” signs were input.) Modify the program.

Fanuc Alarm 411: SERVO ALARM: n–TH AXIS – EXCESS ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The position deviation value when the n–th axis (axis 1–8) moves is larger than the set value. Refer to procedure of trouble shooting. Have you faced Fanuc Alarm 411 SERVO…

Fanuc Alarm 5134: FSSB: OPEN READY TIME OUT Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Initialization did not place FSSB in the open ready state. Have you faced Fanuc Alarm 5134 FSSB: OPEN READY TIME OUT on your machine? Share your experience or troubleshooting tips in the comments…

Fanuc Alarm 4510: ILLEGAL COMMAND IN LINE-PUNCH Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In a linear punching (G45) command, the traveling distance was set to zero or a value 1.5 times larger than the tool size (P) or less. Alternatively, P was not specified. Have you…