Fanuc Alarm 403: SERVO ALARM: CARD/SOFT MISMATCH

Fanuc Alarm 21: ILLEGAL PLANE AXIS COMMANDED Fanus Control Model: 16/18/21 Fanuc Alarm Description An axis not included in the selected plane (by using G17, G18, G19) was commanded in circular interpolation. Modify the program.

Fanuc Alarm 5059: RADIUS IS OUT OF RANGE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A radius exceeding nine digits has been specified for circular interpolation with the center of the arc specified with I, J, and K. Have you faced Fanuc Alarm 5059 RADIUS IS OUT…

Fanuc Alarm 5039: START UNREGISTERED B–AXS PROG Fanuc Control Model: 0i / 0i-Mate – Model B, 16 / 18 / 21 Fanuc Alarm Description T series An attempt was made to execute a program for the B–axis which had not been registered. Have you faced Fanuc Alarm 5039 START UNREGISTERED B–AXS PROG on your machine? Share…

Fanuc Alarm 22: NO CIRCULAR RADIUS Fanus Control Model: 16/18/21 Fanuc Alarm Description When circular interpolation is specified, neither R (specifying an arc radius), nor I, J, and K (specifying the distance from a start point to the center) is specified.

Fanuc CNC Alarm 33: NO SOLUTION AT CRC Fanus Control Model: Series 16 / 18 / 21 (M and T Series) Description During tool radius compensation (G41/G42), the intersection point of two geometric lines or arcs fails to be detected. How to Fix Alarm Correct the tool path in the G-code program, or go to…

Fanuc Alarm 036 (or P/S 36): CAN NOT COMMANDED G31 Fanus Control Model: Series 16/18/21 Description This alarm occurs when a skip cutting command (G31) is called while the machine is actively using cutter compensation (G41 or G42) or tool nose radius compensation. How to Fix Alarm Cancel cutter compensation by writing G40 before issuing…