Fanuc Alarm 22: NO CIRCULAR RADIUS
Fanus Control Model: 16/18/21
Fanuc Alarm Description
When circular interpolation is specified, neither R (specifying an arc radius), nor I, J, and K (specifying the distance from a start point to the center) is specified.
Fanuc Alarm 137: M-CODE & MOVE CMD IN SAME BLK Fanus Control Model: 0 (0-M, 0-T, 0-i) Description An M-code (which is a machine function such as spindle on/off or coolant control) and a ‘Move Command’ (such as X, Y, or Z axis movement) have been combined in a way that is prohibited by Fanuc…
A Fanuc Alarm 402 is a common but critical error that indicates a Servo Alarm: SV Overload. Essentially, the CNC controller has detected that the electrical current being drawn by a specific axis motor is exceeding its rated capacity for too long. The system triggers this alarm as a protective measure to prevent the motor…
Fanuc Alarm 64: SHAPE PROGRAM NOT MONOTONOUSLY Fanus Control Model: 16/18/21 Fanuc Alarm Description T Series;A target shape which cannot be made by monotonic machining was specified in a repetitive canned cycle (G71 or G72).
Fanuc Alarm 72: TOO MANY PROGRAMS Fanus Control Model: 16/18/21 Fanuc Alarm Description The number of programs to be stored exceeded 63 (basic), 125 (option), 200 (option), or 400 (option) or 1000 (option). Delete unnecessary programs and execute program registration again.
Fanuc Alarm 3: TOO MANY DIGITS Fanus Control Model: 16/18/21 Fanuc Alarm Description Data exceeding the maximum allowable number of digits was input. (Refer to the item of max. programmable dimensions.)
Fanuc Alarm 11: NO FEEDRATE COMMANDED Fanus Control Model: 16/18/21 Fanuc Alarm Description Feedrate was not commanded to a cutting feed or the feedrate was inadequate. Modify the program.