Fanuc Alarm 239: BP/S ALARM

Fanuc Alarm 4549: ILLEGAL TOOL DATA FORMAT Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The quantity of tool data patterns to be saved is too large to fit the usable area (16 KB). Have you faced Fanuc Alarm 4549 ILLEGAL TOOL DATA FORMAT on your machine? Share your…

Fanuc Alarm 62: ILLEGAL COMMAND IN G71–G76 Fanus Control Model: 16/18/21 Fanuc Alarm Description T Series;1. The depth of cut in G71 or G72 is zero or negative value. 2. The repetitive count in G73 is zero or negative value. 3. the negative value is specified to Δi or Δk is zero in G74 or…

Fanuc Alarm 79: PROGRAM VERIFY ERROR Fanuc Control Model: 0-i, 16/18/21, 16i/18i/21i, 30i/31i/32i Fanuc Alarm Description In memory or program collation, a program in memory does not match the program being verified. Have you faced Fanuc Alarm 79 PROGRAM VERIFY ERROR on your machine? Share your experience or troubleshooting tips in the comments below to help other…

Fanuc Alarm PS449: Illegal Tool Life Data Fanus Control Model: Series 15 (Model A and B), Series 10 / 11 / 12 Description This alarm occurs when there is a technical error in the Tool Life Management data in the machine control system or the specified life limit for a particular tool in the system…

Fanuc Alarm 5046: ILLEGAL PARAMETER (ST.COMP) Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The parameter settings for straightness compensation contain an error. Possible causes are as follows;1. A parameter for a movement axis or compensation axis contains an axis number which is not used.;2. More than 128…

Fanuc Alarm 5082: DATA SERVER ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description This alarm is detailed on the data server message screen. Have you faced Fanuc Alarm 5082 DATA SERVER ERROR on your machine? Share your experience or troubleshooting tips in the comments below to help other…