Fanuc Alarm 4505: ILLEGAL COMMAND IN GRID

Fanuc Alarm PS006: Illegal Use of Minus Sign Fanus Control Model: Series 0i (Model C, D, and F), Series 30i / 31i / 32i, Series 16i / 18i / 21i Description Minus Sign – is written in a place where it is not allowed. This alarm can sometimes be caused by a logical error in…

Fanuc Alarm 5157: PARAMETER ZERO Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Zero is set in the parameter for the maximum cutting feedrate (parameter No. 1422 or 1432). Zero is set in the parameter for the acceleration/deceleration before interpolation (parameter No. 1770 or 1771). Set the parameter…

Fanuc Alarm 4521: EXCESS NIBBLING MOVEMENT (X, Y) Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In the nibbling mode, the X-axis or Y-axis traveling distance was larger than or equal to the limit (No. 16188 to 16193). Have you faced Fanuc Alarm 4521 EXCESS NIBBLING MOVEMENT (X,…

Fanuc Alarm PS891: ILLEGAL COMMAND G05 Fanus Control Model: Series 15 control (including Series 15-MA, 15-TA, 15-MF, and 15-TF). Description When the G05 command is written incorrectly in the program or the controller detects a technical error in the use of the G05 command. One reason for this alarm is that the G05 command is…

Fanuc Alarm 23: ILLEGAL RADIUS COMMAND Fanus Control Model: 16/18/21 Fanuc Alarm Description (T series) In circular interpolation by radius designation, negative value was commanded for address R. Modify the program.

Fanuc Alarm 5073: NO DECIMAL POINT Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A decimal point is not specified for a command for which a decimal point must be specified. Have you faced Fanuc Alarm 5073 NO DECIMAL POINT on your machine? Share your experience or troubleshooting tips…