Fanuc Alarm 118: PARENTHESIS NESTING ERROR

Fanuc Alarm 3: Too Many Digits Error Fanus Control Model: Fanuc 0i, 16i/18i, and 21i/31i , 30i/31i/32i/0i-MODEL B Description Entering more digits than allowed in a program. Using non-standard digits in a G-code command for an X, Y, Z position or a speed value. This error usually indicates human error or a problem with the…

Fanuc Alarm 029 (or PS029) ILLEGAL OFFSET VALUE Fanus Control Model: Series 21 / 21i (Model A, B, & C) and modern controls like the 30i / 31i / 32i series Description Any value in the Tool Offset or Work Offset that is outside the specified range of the machine. Fanuc parameters have a limit…

Fanuc Alarm 6: ILLEGAL USE OF NEGATIVE SIGN Fanus Control Model: 16/18/21 Fanuc Alarm Description Sign “ – ” input error (Sign “ – ” was input after an address with which it cannot be used. Or two or more “ – ” signs were input.) Modify the program.

Fanuc Alarm 14: ILLEGAL LEAD COMMAND Fanuc Series 0i (0i-TC, 0i-TD, 0i-TF) Fanuc Series 16i / 18i / 21i Fanuc Series 30i / 31i / 32i Description The wrong feed rate and lead limit of the (Threading) process is higher or lower than the limit set in the program, or there is an error in…

Fanuc Alarm 10: IMPROPER G–CODE Fanus Control Model: 16/18/21 Fanuc Alarm Description An unusable G code or G code corresponding to the function not provided is specified. Modify the program.

Fanuc Alarm 58: END POINT NOT FOUND Fanus Control Model: 16/18/21 Fanuc Alarm Description In an arbitrary angle chamfering or corner R cutting block, a specified axis is not in the selected plane. Correct the program.