CNC Alarms

Fanuc Alarm 212: ILLEGAL PLANE SELECT Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description M series The arbitrary angle chamfering or a corner R is commanded or the plane including an additional axis. Correct the program. Have you faced Fanuc Alarm 212 ILLEGAL PLANE SELECT on your machine? Share…

Fanuc Alarm 213: ILLEGAL COMMAND IN SYNCHRO–MODE Fanuc Control Model: Series 0i / 0i-Mate,16 / 18 / 21-Series, 160i/180i/210i and 30i/31i/32i Fanuc Alarm Description Movement is commanded for the axis to be synchronously controlled. Any of the following alarms occurred in the operation with the simple synchronization control.;1) The program issued the move command to…

Fanuc Alarm 214: ILLEGAL COMMAND IN SYNCHRO–MODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Coordinate system is set or tool compensation of the shift type is executed in the synchronous control. Correct the program. Have you faced Fanuc Alarm 214 ILLEGAL COMMAND IN SYNCHRO–MODE on your machine? Share…

Fanuc Alarm 217: DUPLICATE G51.2 (COMMANDS) Fanuc Control Model: Fanuc Alarm 217: DUPLICATE G51.2 (COMMANDS) is specific to the T-series (Turning / Lathe controls). Fanuc Alarm Description T series G51.2/G251 is further commanded in the G51.2/G251 mode. Modify the program. Have you faced Fanuc Alarm 217 DUPLICATE G51.2 (COMMANDS) on your machine? Share your experience or…

Fanuc Alarm 218: NOT FOUND P/Q COMMAND IN G251 (T series) Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm 218 is a Program/Software (P/S) alarm designated specifically for T series (Turning/Lathe) CNC control models. Fanuc Alarm Description T series P or Q is not commanded in the G251 block,…

Fanuc Alarm 219: COMMAND G250/G251 INDEPENDENTLY Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description T series G251 and G250 are not independent blocks. Have you faced Fanuc Alarm 219 COMMAND G250/G251 INDEPENDENTLY on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC…

Fanuc Alarm 220: ILLEGAL COMMAND IN SYNCHR–MODE Fanuc Control Model: Series 0i-T, 16i/18i/21i-T, and 30i/31i/32i-T Fanuc Alarm Description T series In the synchronous operation, movement is commanded by the NC program or PMC axis control interface for the synchronous axis. Have you faced Fanuc Alarm 220 ILLEGAL COMMAND IN SYNCHR–MODE on your machine? Share your experience…

Fanuc Alarm 221: ILLEGAL COMMAND IN SYNCHR–MODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description T series Polygon machining synchronous operation and axis control or balance cutting are executed at a time. Modify the program. Have you faced Fanuc Alarm 221 ILLEGAL COMMAND IN SYNCHR–MODE on your machine? Share…

Fanuc Alarm 222: DNC OP. NOT ALLOWED IN BG.–EDIT Fanuc Control Model: 16 / 18 / 21 (Models A, B, C), 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description M series Input and output are executed at a time in the background edition. Execute a correct operation. Have you faced Fanuc Alarm 222 DNC OP. NOT…

Fanuc Alarm 224: RETURN TO REFERENCE POINT Fanuc Control Model: 15 /15i, 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description M series Reference position return has not been performed before the automatic operation starts. Perform reference position return only when bit 0 of parameter 1005 is 0. Have you faced Fanuc…

Fanuc Alarm 225: SYNCHRONOUS/MIXED CONTROL ERROR Fanuc Control Model: 16i / 18i / 21 , 0i-T / 0i-TD , 30i / 31i – T series Fanuc Alarm Description T series (At two–path);This alarm is generated in the following circumstances. (Searched for during synchronous and mixed control command.;1 When there is a mistake in axis number…

Fanuc Alarm 226: ILLEGAL COMMAND IN SYNCHRO– MODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description T series (At two–path);A travel command has been sent to the axis being synchronized in synchronous mode. Modify the program or the parameter. Have you faced Fanuc Alarm 226 ILLEGAL COMMAND IN…

Fanuc Alarm 91: REFERENCE RETURN INCOMPLETE Fanuc Control Model: Fanuc 0i-D/F, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In the automatic operation halt state, manual reference position return cannot be performed. Have you faced Fanuc Alarm 91 REFERENCE RETURN INCOMPLETE on your machine? Share your experience or troubleshooting tips in the comments below to help…

Fanuc Alarm 92: AXES NOT ON THE REFERENCE POINT Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The commanded axis by G27 (Reference position return check) did not return to the reference position. Have you faced Fanuc Alarm 92 AXES NOT ON THE REFERENCE POINT on your machine?…

Fanuc Alarm 94: P TYPE NOT ALLOWED (COORD CHG) Fanuc Control Model: Fanuc 16 / 18 / 21, 16i/18i/21i, and 30i/31i/32i series Fanuc Alarm Description P type cannot be specified when the program is restarted. (After the automatic operation was interrupted, the coordinate system setting operation was performed.) Perform the correct operation according to the…

Fanuc Alarm 95: P TYPE NOT ALLOWED (EXT OFS CHG) Fanuc Control Model: Series 0i (0i-A, 0i-B, 0i-C, 0i-D, 0i-F), 16 / 18 / 21 and their i-series variants (16i, 18i, 21i), 30i / 31i / 32i Fanuc Alarm Description P type cannot be specified when the program is restarted.(After the automatic operation was interrupted,…

Fanuc Alarm 109: FORMAT ERROR IN G08 Fanuc Control Model: Fanuc 0i-D/F, 16i/18i/21i, and 30i/31i/32i series Fanuc Alarm Description A value other than 0 or 1 was specified after P in the G08 code, or no value was specified. Have you faced Fanuc Alarm 109 FORMAT ERROR IN G08 on your machine? Share your experience…