Fanuc Alarm 130: ILLEGAL AXIS OPERATION

Fanuc Alarm 86: DR SIGNAL OFF Fanus Control Model: Fanuc 16, 18, and 21 Series (including i-series), Fanuc 0/0i Series (0-M, 0-T, 0i-MA, 0i-TB, 0i-MC, etc.) Description This simply means that the controller is not receiving a “Data Set Ready” (DSR) signal from the external device PC or laptop. This problem mostly occurs when you…

Fanuc Alarm 5096: MISMATCH WAITING M–CODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Different wait codes (M codes) were specified in HEAD1 and HEAD2. Correct the program. Have you faced Fanuc Alarm 5096 MISMATCH WAITING M–CODE on your machine? Share your experience or troubleshooting tips in the comments…

Fanuc Alarm 10: IMPROPER G–CODE Fanus Control Model: 16/18/21 Fanuc Alarm Description An unusable G code or G code corresponding to the function not provided is specified. Modify the program.

Fanuc Alarm 5041: CAN NOT COMMANDED G110 BLOCK Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description T series;Blocks containing the G110 codes were successively specified in tool– tip radius compensation for the B–axis. Have you faced Fanuc Alarm 5041 CAN NOT COMMANDED G110 BLOCK on your machine? Share your…

Fanuc Alarm 137: M-CODE & MOVE CMD IN SAME BLK Fanus Control Model: 0 (0-M, 0-T, 0-i) Description An M-code (which is a machine function such as spindle on/off or coolant control) and a ‘Move Command’ (such as X, Y, or Z axis movement) have been combined in a way that is prohibited by Fanuc…

Fanuc Alarm 5064: DIFFERRENT AXIS UNIT (IS–B, IS–C) Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Circular interpolation has been specified on a plane consisting of axes having different increment systems. Have you faced Fanuc Alarm 5064 DIFFERRENT AXIS UNIT (IS–B, IS–C) on your machine? Share your experience or…