Fanuc Alarm 130: ILLEGAL AXIS OPERATION

Fanuc Alarm 5405: ILLEGAL PARAMETER IN G41.2/ G42.2 Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The parameter setting that determines the relationship between the rotation axis and rotation plane is incorrect. Have you faced Fanuc Alarm 5405 ILLEGAL PARAMETER IN G41.2/ G42.2 on your machine? Share your experience…

Fanuc Alarm 213: ILLEGAL COMMAND IN SYNCHRO–MODE Fanuc Control Model: Series 0i / 0i-Mate,16 / 18 / 21-Series, 160i/180i/210i and 30i/31i/32i Fanuc Alarm Description Movement is commanded for the axis to be synchronously controlled. Any of the following alarms occurred in the operation with the simple synchronization control.;1) The program issued the move command to…

Fanuc Alarm 5110: IMPROPER G–CODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description An illegal G code was specified in look–ahead control mode (multi blocks are read in advance). A command was specified for the index table indexing axis in look– ahead control mode (multi blocks are read…

Fanuc Alarm 2: TV PARITY ALARM Fanus Control Model: 16/18/21 Fanuc Alarm Description TV alarm (The number of characters in a block is odd). This alarm will be generated only when the TV check is effective.

Fanuc Alarm 5213: SCREEN COPY: COMMUNICATION ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The memory card cannot be used. Check the memory card. (Check whether the memory card is write–protected or defective.) Have you faced Fanuc Alarm 5213 SCREEN COPY: COMMUNICATION ERROR on your machine? Share your…

Fanuc Alarm 4523: ILLEGAL COMMAND IN CIRCLE-NIBBL Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In a circular nibbling (G68) command, the traveling pitch (Q) was set to zero, a negative value, or a value larger than or equal to the limit (No. 16186, 16187), or the radius…