Fanuc Alarm 5433: MANUAL INTERVENTION IN 3–D CIR

Fanuc Alarm 5244: TOO MANY DI ON Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Even when an M code was encountered in automatic operation mode, the flexible synchronization mode signal was not driven on or off. Check the ladder and M codes. Have you faced Fanuc Alarm…

Fanuc Alarm 5212: SCREEN COPY: PARAMETER ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description There is a parameter setting error. Check that 4 is set as the I/O channel. Have you faced Fanuc Alarm 5212 SCREEN COPY: PARAMETER ERROR on your machine? Share your experience or troubleshooting tips…

Fanuc Alarm 5227: FILE NOT FOUND Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A specified file is not found during communication with the built–in Handy File. Have you faced Fanuc Alarm 5227 FILE NOT FOUND on your machine? Share your experience or troubleshooting tips in the comments below…

Fanuc Alarm 5: NO DATA AFTER ADDRESS Fanus Control Model: 16/18/21 Fanuc Alarm Description The address was not followed by the appropriate data but was followed by another address or EOB code. Modify the program.

Fanuc Alarm 66: IMPROPER G–CODE IN G71–G73 Fanus Control Model: 16/18/21 Fanuc Alarm Description T Series;An unallowable G code was commanded between two blocks specified by address P in G71, G72, or G73. Modify the program.

Fanuc Alarm 5311: FSSB:ILLEGAL CONNECTION Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A connection related to FSSB is illegal. This alarm is issued when either of the following is found;1. Two axes having adjacent servo axis numbers (parameter No. 1023), odd number and even number, are assigned…