Fanuc Alarm 5425: ILLEGAL OFFSET VALUE
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
The offset number is incorrect.
Have you faced Fanuc Alarm 5425 ILLEGAL OFFSET VALUE on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 5073: NO DECIMAL POINT Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A decimal point is not specified for a command for which a decimal point must be specified. Have you faced Fanuc Alarm 5073 NO DECIMAL POINT on your machine? Share your experience or troubleshooting tips…
Fanuc Alarm 5065: DIFFERENT AXIS UNIT (PMC AXIS) Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Axes having different increment systems have been specified in the same DI/DO group for PMC axis control. Modify the setting of parameter No. 8010. Have you faced Fanuc Alarm 5065 DIFFERENT AXIS…
Fanuc Alarm 5408: G41.3 ILLEGAL START_UP Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description 1) In a mode of group 01 except G00 and G01, G41.3 (startup) is specified.;2) At startup, the included angle of the tool direction vector and move direction vector is 0 or 180 degrees….
Fanuc Alarm 5229: WRITE PROTECTED Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A floppy disk in the built–in Handy File is write protected. Have you faced Fanuc Alarm 5229 WRITE PROTECTED on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC…
Fanuc Alarm 5014: TRACE DATA NOT FOUND Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description M series;Transfer cannot be performed because no trace data exists. Have you faced Fanuc Alarm 5014 TRACE DATA NOT FOUND on your machine? Share your experience or troubleshooting tips in the comments below to…
Fanuc Alarm 413: SERVO ALARM: n–th AXIS – LSI OVERFLOW Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The contents of the error register for the n–th axis (axis 1–8) exceeded ±231 power. This error usually occurs as the result of an improperly set parameters. Have you faced…