Fanuc Alarm 5418: NURBS:ILLEGAL KNOT VALUE

Fanuc Alarm 71: DATA NOT FOUND Fanuc Control Model: Series 0 / 0-Mate / 0i (Model A, B, C, D, F), 16 / 18 / 21 and 16i / 18i / 21i, 160i / 180i / 210i, 30i / 31i / 32i Fanuc Alarm Description The address to be searched was not found. Or the…

Fanuc Alarm 5116: SPL: ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description There is a program error in a block under look–ahead control. Monotone increasing of knots is not observed. In NURBS interpolation mode, a mode that cannot be used together is specified. Have you faced Fanuc…

Fanuc Alarm 213: ILLEGAL COMMAND IN SYNCHRO–MODE Fanuc Control Model: Series 0i / 0i-Mate,16 / 18 / 21-Series, 160i/180i/210i and 30i/31i/32i Fanuc Alarm Description Movement is commanded for the axis to be synchronously controlled. Any of the following alarms occurred in the operation with the simple synchronization control.;1) The program issued the move command to…

Fanuc Alarm 5414: NURBS:ILLEGAL KNOT Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The number of blocks containing knots only is insufficient. Have you faced Fanuc Alarm 5414 NURBS:ILLEGAL KNOT on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and…

Fanuc Alarm 73: PROGRAM NUMBER ALREADY IN USE Fanuc Control Model: Series 0 / 00 / 0-Mate, Series 0i-A/B/C/D/F), 16 / 18 / 21, 16i / 18i / 21i, 160i / 180i / 210i Fanuc Alarm Description The commanded program number has already been used. Change the program number or delete unnecessary programs and execute…