Fanuc Alarm 5417: NURBS:ILLEGAL MULTI–KNOT
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
As many knots as the number of steps are not specified at the start and end points.
Have you faced Fanuc Alarm 5417 NURBS:ILLEGAL MULTI–KNOT on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 4602: ILLEGAL T-CODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The specified T command is not cataloged on the tool register screen. Have you faced Fanuc Alarm 4602 ILLEGAL T-CODE on your machine? Share your experience or troubleshooting tips in the comments below to help other…
Fanuc Alarm 5403: SPL:CAN NOT MAKE VECTOR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Three–dimensional tool compensation vectors cannot be generated.;· When a three–dimensional tool compensation vector is created for the second or subsequent point, that point, previous point, and next point are on the same straight…
Fanuc Alarm 5407: ILLEGAL COMMAND IN G41.3 Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description 1) A G code that belongs to group 01 except G00 and G01 is specified in G41.3 mode.;2) An offset command (a G code belonging to group 07) is specified in G41.3 mode.;3)…
Fanuc Alarm 217: DUPLICATE G51.2 (COMMANDS) Fanuc Control Model: Fanuc Alarm 217: DUPLICATE G51.2 (COMMANDS) is specific to the T-series (Turning / Lathe controls). Fanuc Alarm Description T series G51.2/G251 is further commanded in the G51.2/G251 mode. Modify the program. Have you faced Fanuc Alarm 217 DUPLICATE G51.2 (COMMANDS) on your machine? Share your experience or…
Fanuc Alarm 5409: ILLEGAL PARAMETER IN G41.3 Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The parameter setting (No. xxxx to xxxx) that determines the relationship between the rotation axis and rotation plane is incorrect. Have you faced Fanuc Alarm 5409 ILLEGAL PARAMETER IN G41.3 on your machine? Share…
Fanuc Alarm 0: MISSING MOVE AFTER CHF/CNR Fanuc Control Model: Fanuc 0i, 16i / 18i / 21i, 30i / 31i / 32i Fanuc Alarm 51 (PS0051) is a Program/Software alarm that occurs during Chamfering (CHF) or Corner Rounding (CNR) operations. It triggers when the controller encounters a chamfering/corner rounding block that is not immediately followed…