Fanuc Alarm 5032: NEW PRG REGISTERED IN B–AXS MOVE

Fanuc Alarm 94: P TYPE NOT ALLOWED (COORD CHG) Fanuc Control Model: Fanuc 16 / 18 / 21, 16i/18i/21i, and 30i/31i/32i series Fanuc Alarm Description P type cannot be specified when the program is restarted. (After the automatic operation was interrupted, the coordinate system setting operation was performed.) Perform the correct operation according to the…

Fanuc Alarm 59: PROGRAM NUMBER NOT FOUND Fanus Control Model: 16/18/21 Fanuc Alarm Description In an external program number search, a specified program number was not found. Otherwise, a program specified for searching is being edited in background processing. Alternatively, the program with the program number specified in a one–touch macro call is not found…

Fanuc Alarm 231: ILLEGAL FORMAT IN G10 OR L50 Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Any of the following errors occurred in the specified format at the programmable– parameter input.;1 Address N or R was not entered.;2 A number not specified for a parameter was entered.;3…

Fanuc Alarm 4530: A/B MACRO NUMBER ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The number for storing and calling by an A or B macro was set to a value beyond the range from 1 to 5. Have you faced Fanuc Alarm 4530 A/B MACRO NUMBER…

Fanuc Alarm 404: SERVO ALARM: n–TH AXIS VRDY ON Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Even though the n–th axis (axis 1–8) READY signal (MCON) went off, the servo amplifier READY signal (DRDY) is still on. Or, when the power was turned on, DRDY went on…

Fanuc Alarm 6: ILLEGAL USE OF NEGATIVE SIGN Fanus Control Model: 16/18/21 Fanuc Alarm Description Sign “ – ” input error (Sign “ – ” was input after an address with which it cannot be used. Or two or more “ – ” signs were input.) Modify the program.