Fanuc Alarm 5009: PARAMETER ZERO
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
The maximum feedrate (parameter No. 1422) or the feedrate in dry run (parameter No. 1410) is 0 in the HPCC model.
Have you faced Fanuc Alarm 5009 PARAMETER ZERO on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 5020: PARAMETER OF RESTART ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description An erroneous parameter was specified for restarting a program. A parameter for program restart is invalid. Have you faced Fanuc Alarm 5020 PARAMETER OF RESTART ERROR on your machine? Share your experience or troubleshooting…
Fanuc Alarm 5062: ILLEGAL COMMAND IN G02.3/G03.3 Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The value specified in an exponential interpolation command (G02.3/03.3) is illegal. A value that does not allow exponential interpolation is specified. (For example, a negative value is specified in In.) Have you faced…
Fanuc Alarm 91: REFERENCE RETURN INCOMPLETE Fanuc Control Model: Fanuc 0i-D/F, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In the automatic operation halt state, manual reference position return cannot be performed. Have you faced Fanuc Alarm 91 REFERENCE RETURN INCOMPLETE on your machine? Share your experience or troubleshooting tips in the comments below to help…
Fanuc Alarm 62: ILLEGAL COMMAND IN G71–G76 Fanus Control Model: 16/18/21 Fanuc Alarm Description T Series;1. The depth of cut in G71 or G72 is zero or negative value. 2. The repetitive count in G73 is zero or negative value. 3. the negative value is specified to Δi or Δk is zero in G74 or…
Fanuc Alarm 4602: ILLEGAL T-CODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The specified T command is not cataloged on the tool register screen. Have you faced Fanuc Alarm 4602 ILLEGAL T-CODE on your machine? Share your experience or troubleshooting tips in the comments below to help other…
Fanuc Alarm 4508: ILLEGAL COMMAND IN RADIUS Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In a radius (G88) command, the traveling pitch (Q) or radius (I) was set to zero or a negative value, or the traveling pitch (Q) was greater than or equal to the arc…