Fanuc Alarm 5062: ILLEGAL COMMAND IN G02.3/G03.3

Fanuc Alarm 5400: SPL:ILLEGAL AXIS COMMAND Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description An axis specified for spline interpolation or smooth interpolation is incorrect. If an axis that is not the spline axis is specified in spline interpolation mode, this alarm is issued. The spline axis is…

Fanuc Alarm 72: TOO MANY PROGRAMS Fanuc Alarm 72: TOO MANY PROGRAMS occurs when the total number of registered programs stored in the CNC memory exceeds the maximum allowable limit. Fanuc Control Model: 16 / 18 / 21, 16i / 18i / 21i, 160i / 180i / 210i Fanuc Alarm Description The number of programs…

Fanuc Alarm 22: NO CIRCULAR RADIUS Fanus Control Model: 16/18/21 Fanuc Alarm Description When circular interpolation is specified, neither R (specifying an arc radius), nor I, J, and K (specifying the distance from a start point to the center) is specified.

Fanuc Alarm 5013: HPCC: CRC OFS REMAIN AT CANCEL Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description G05P0 has been specified in G41/G42 mode or with offset remaining Have you faced Fanuc Alarm 5013 HPCC: CRC OFS REMAIN AT CANCEL on your machine? Share your experience or troubleshooting tips…

Fanuc Alarm PS067: G70–G73 IN FORBIDDEN MODE Fanus Control Model: Most commonly associated with Fanuc Series 0 (0-T/0-TF) and the Series 16/18/21 Description The control system receives a command in G70, G71, G72, or G73 that is incompatible with its specific mode. This problem usually occurs when you run these Canned Cycles in a sub-program…

Fanuc Alarm 5437: PARAMETER SETTING ERROR 2 Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Incorrect parameter setting (setting of the tool axis) Have you faced Fanuc Alarm 5437 PARAMETER SETTING ERROR 2 on your machine? Share your experience or troubleshooting tips in the comments below to help other…