Fanuc Alarm 73: PROGRAM NUMBER ALREADY IN USE
Fanus Control Model: 16/18/21
Fanuc Alarm Description
The commanded program number has already been used. Change the program number or delete unnecessary programs and execute program registration again.
Fanuc Alarm PS058: S–COMMAND OUT OF RANGE Fanus Control Model: 0i-D/F series, 16i/18i/21i, and the 30i/31i/32i series. Description If a spindle speed is written in the program that exceeds the machine’s operating capacity, the system will immediately stop the operation and an alarm will appear on the screen. How to Fix Alarm Check the S…
Fanuc Alarm 6: ILLEGAL USE OF NEGATIVE SIGN Fanus Control Model: 16/18/21 Fanuc Alarm Description Sign “ – ” input error (Sign “ – ” was input after an address with which it cannot be used. Or two or more “ – ” signs were input.) Modify the program.
Fanuc Alarm PS145: G10.1 TIME OUT Fanus Control Model: Fanuc Series 15 (specifically Model B) and sometimes the Series 10, 11, and 12 control systems. Description When the controller fails to receive a response within the time limit for a specific operation. If the G10.1 command is entered with an incorrect format or illogical values,…
Fanuc Alarm 118: PARENTHESIS NESTING ERROR Fanus Control Model: 16/18/21 Fanuc Alarm Description The nesting level of brackets or parentheses in a macro expression exceeds the limit of 5 levels.
Fanuc Alarm 62: ILLEGAL COMMAND IN G71–G76 Fanus Control Model: 16/18/21 Fanuc Alarm Description T Series;1. The depth of cut in G71 or G72 is zero or negative value. 2. The repetitive count in G73 is zero or negative value. 3. the negative value is specified to Δi or Δk is zero in G74 or…
Fanuc Alarm 5: NO DATA AFTER ADDRESS Fanus Control Model: 16/18/21 Fanuc Alarm Description The address was not followed by the appropriate data but was followed by another address or EOB code. Modify the program.