Fanuc Alarm 71: DATA NOT FOUND

Fanuc Alarm PS017 ILLEGAL MODE FOR GOTO/WHILE/DO Fanus Control Model: 10/11/12/15/15i Description This alarm appears when the control system has difficulty executing these macro statements such as GOTO, WHILE, or DO. Does your CNC controller accept these specific commands or is there a fundamental error in the program logic that violates the prevailing rules of…

Fanuc Alarm 25: CANNOT COMMAND F0 IN G02/G03 Fanus Control Model: 16/18/21 Fanuc Alarm Description F0 (fast feed) was instructed by F1 –digit column feed in circular interpolation. Modify the program.

Fanuc Alarm 3: Too Many Digits Error Fanus Control Model: Fanuc 0i, 16i/18i, and 21i/31i , 30i/31i/32i/0i-MODEL B Description Entering more digits than allowed in a program. Using non-standard digits in a G-code command for an X, Y, Z position or a speed value. This error usually indicates human error or a problem with the…

Fanuc Alarm 69: FORMAT ERROR IN G70–G73 Fanus Control Model: 16/18/21 Fanuc Alarm Description T Series;The final move command in the blocks specified by P and Q of G70, G71, G72, and G73 ended with chamfering or corner R. Modify the program.

Fanuc Alarm PS145: G10.1 TIME OUT Fanus Control Model: Fanuc Series 15 (specifically Model B) and sometimes the Series 10, 11, and 12 control systems. Description When the controller fails to receive a response within the time limit for a specific operation. If the G10.1 command is entered with an incorrect format or illogical values,…

Fanuc Alarm 73: PROGRAM NUMBER ALREADY IN USE Fanus Control Model: 16/18/21 Fanuc Alarm Description The commanded program number has already been used. Change the program number or delete unnecessary programs and execute program registration again.