Fanuc Alarm 70: NO PROGRAM SPACE IN MEMORY
Fanuc Alarm 70: NO PROGRAM SPACE IN MEMORY
Fanus Control Model: 16/18/21
Fanuc Alarm Description
The memory area is insufficient. Delete any unnecessary programs, then retry.
Similar Posts
Fanuc Alarm 5412: NURBS:NO KNOT COMMAND
Fanuc Alarm 5412: NURBS:NO KNOT COMMAND Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description No knot is specified. Alternatively, in NURBS interpolation mode, a block not relating to NURBS interpolation is specified. Have you faced Fanuc Alarm 5412 NURBS:NO KNOT COMMAND on your machine? Share your experience or troubleshooting…
Fanuc Alarm 130: ILLEGAL AXIS OPERATION
Fanuc Alarm 130: ILLEGAL AXIS OPERATION Fanuc Control Model: Fanuc 0i-D/F, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description H code and automatic. Have you faced Fanuc Alarm 130 ILLEGAL AXIS OPERATION on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 4534: W MACRO NUMBER NOT FOUND
Fanuc Alarm 4534: W MACRO NUMBER NOT FOUND Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Macro number W specified in a U or V macro command is not stored. Have you faced Fanuc Alarm 4534 W MACRO NUMBER NOT FOUND on your machine? Share your experience or troubleshooting…
Fanuc Alarm 4521: EXCESS NIBBLING MOVEMENT (X, Y)
Fanuc Alarm 4521: EXCESS NIBBLING MOVEMENT (X, Y) Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In the nibbling mode, the X-axis or Y-axis traveling distance was larger than or equal to the limit (No. 16188 to 16193). Have you faced Fanuc Alarm 4521 EXCESS NIBBLING MOVEMENT (X,…
Fanuc Alarm 5065: DIFFERENT AXIS UNIT (PMC AXIS)
Fanuc Alarm 5065: DIFFERENT AXIS UNIT (PMC AXIS) Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Axes having different increment systems have been specified in the same DI/DO group for PMC axis control. Modify the setting of parameter No. 8010. Have you faced Fanuc Alarm 5065 DIFFERENT AXIS…
Fanuc Alarm 4532: IMPROPER U/V MACRO NUMBER
Fanuc Alarm 4532: IMPROPER U/V MACRO NUMBER Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The number of an inhibited macro (number beyond the range from 01 to 99) was specified in a U or V macro command. Have you faced Fanuc Alarm 4532 IMPROPER U/V MACRO NUMBER on…