Fanuc Alarm 69: FORMAT ERROR IN G70–G73

The Fanuc SV040 alarm is a servo-related error that indicates a N-th Axis Overload. This means the CNC system has detected that the motor is drawing too much current or is working too hard to maintain its position or movement, potentially leading to overheating. Common Causes The SV040 alarm can be triggered by either mechanical…

Fanuc Alarm 64: SHAPE PROGRAM NOT MONOTONOUSLY Fanus Control Model: 16/18/21 Fanuc Alarm Description T Series;A target shape which cannot be made by monotonic machining was specified in a repetitive canned cycle (G71 or G72).

Fanuc Alarm 20: OVER TOLERANCE OF RADIUS Fanus Control Model: 16/18/21 Fanuc Alarm Description In circular interpolation (G02 or G03), difference of the distance between the start point and the center of an arc and that between the end point and the center of the arc exceeded the value specified in parameter No. 3410.

Fanuc Alarm 59: PROGRAM NUMBER NOT FOUND Fanus Control Model: 16/18/21 Fanuc Alarm Description In an external program number search, a specified program number was not found. Otherwise, a program specified for searching is being edited in background processing. Alternatively, the program with the program number specified in a one–touch macro call is not found…

Fanuc Alarm 34: NO CIRC ALLOWED IN ST–UP /EXT BLK Fanus Control Model: Series 0i / 16i / 18i / 21i / 31i / 32i Description This alarm (Fanuc Alarm 34) occurs when you are starting (Start-up block) or ending (Cancel block) Cutter Radius Compensation using G41 or G42, and write Circular Interpolation (G02/G03) instead…

Fanuc Alarm PS145: G10.1 TIME OUT Fanus Control Model: Fanuc Series 15 (specifically Model B) and sometimes the Series 10, 11, and 12 control systems. Description When the controller fails to receive a response within the time limit for a specific operation. If the G10.1 command is entered with an incorrect format or illogical values,…