Fanuc Alarm 5413: NURBS:ILLEGAL AXIS COMMAND
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
An axis not specified with controlled points is specified in the first block.
Have you faced Fanuc Alarm 5413 NURBS:ILLEGAL AXIS COMMAND on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 5118: SPL: ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description After manual intervention with manual absolute mode set to on, NURBS interpolation was restarted. Have you faced Fanuc Alarm 5118 SPL: ERROR on your machine? Share your experience or troubleshooting tips in the comments below to…
Fanuc Alarm 92: AXES NOT ON THE REFERENCE POINT Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The commanded axis by G27 (Reference position return check) did not return to the reference position. Have you faced Fanuc Alarm 92 AXES NOT ON THE REFERENCE POINT on your machine?…
Fanuc Alarm 30: ILLEGAL OFFSET NUMBER Fanus Control Model: Series 0/16/18/21/30i/31i/32i Description This alarm occurs when the CNC control is commanded to use a Tool Offset Number that does not exist in the machine’s memory or exceeds the maximum limit defined by your system’s parameters. This problem is usually caused by incorrect use of T-codes…
Fanuc Alarm 221: ILLEGAL COMMAND IN SYNCHR–MODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description T series Polygon machining synchronous operation and axis control or balance cutting are executed at a time. Modify the program. Have you faced Fanuc Alarm 221 ILLEGAL COMMAND IN SYNCHR–MODE on your machine? Share…
Fanuc Alarm 5064: DIFFERRENT AXIS UNIT (IS–B, IS–C) Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Circular interpolation has been specified on a plane consisting of axes having different increment systems. Have you faced Fanuc Alarm 5064 DIFFERRENT AXIS UNIT (IS–B, IS–C) on your machine? Share your experience or…
Fanuc Alarm 5243: DATA OUT OF RANGE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The gear ratio is not set correctly. (This alarm is issued when flexible synchronization is turned on.) Have you faced Fanuc Alarm 5243 DATA OUT OF RANGE on your machine? Share your experience or…