Fanuc Alarm 59: PROGRAM NUMBER NOT FOUND
Fanus Control Model: 16/18/21
Fanuc Alarm Description
In an external program number search, a specified program number was not found. Otherwise, a program specified for searching is being edited in background processing. Alternatively, the program with the program number specified in a one–touch macro call is not found in memory. Check the program number and external signal. Or discontinue the background editing.
Fanuc Alarm PS006: Illegal Use of Minus Sign Fanus Control Model: Series 0i (Model C, D, and F), Series 30i / 31i / 32i, Series 16i / 18i / 21i Description Minus Sign – is written in a place where it is not allowed. This alarm can sometimes be caused by a logical error in…
A Fanuc Alarm 402 is a common but critical error that indicates a Servo Alarm: SV Overload. Essentially, the CNC controller has detected that the electrical current being drawn by a specific axis motor is exceeding its rated capacity for too long. The system triggers this alarm as a protective measure to prevent the motor…
Fanuc Alarm 70: NO PROGRAM SPACE IN MEMORY Fanus Control Model: 16/18/21 Fanuc Alarm Description The memory area is insufficient. Delete any unnecessary programs, then retry.
Fanuc Alarm PS891: ILLEGAL COMMAND G05 Fanus Control Model: Series 15 control (including Series 15-MA, 15-TA, 15-MF, and 15-TF). Description When the G05 command is written incorrectly in the program or the controller detects a technical error in the use of the G05 command. One reason for this alarm is that the G05 command is…
Fanuc Alarm 157: TOO MANY TOOL GROUPS Fanus Control Model: 16i / 18i series, 21 / 21i series Description Each control model has a defined number of tool groups. This alarm is displayed when this number exceeds the machine’s limit. If the programmer does not delete unnecessary tool groups, the control stops the machine’s operation….
Fanuc Alarm 66: IMPROPER G–CODE IN G71–G73 Fanus Control Model: 16/18/21 Fanuc Alarm Description T Series;An unallowable G code was commanded between two blocks specified by address P in G71, G72, or G73. Modify the program.