Fanuc Alarm 124: MISSING END STATEMENT

Fanuc Alarm 4521: EXCESS NIBBLING MOVEMENT (X, Y) Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In the nibbling mode, the X-axis or Y-axis traveling distance was larger than or equal to the limit (No. 16188 to 16193). Have you faced Fanuc Alarm 4521 EXCESS NIBBLING MOVEMENT (X,…

Fanuc Alarm 4538: W NO. NOT FOUND IN MULTI-PIECE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Macro number W specified in the command for taking multiple workpieces (G73, G74) is not stored. Have you faced Fanuc Alarm 4538 W NO. NOT FOUND IN MULTI-PIECE on your machine? Share…

Fanuc Alarm 10: IMPROPER G–CODE Fanus Control Model: 16/18/21 Fanuc Alarm Description An unusable G code or G code corresponding to the function not provided is specified. Modify the program.

Fanuc Alarm 95: P TYPE NOT ALLOWED (EXT OFS CHG) Fanuc Control Model: Series 0i (0i-A, 0i-B, 0i-C, 0i-D, 0i-F), 16 / 18 / 21 and their i-series variants (16i, 18i, 21i), 30i / 31i / 32i Fanuc Alarm Description P type cannot be specified when the program is restarted.(After the automatic operation was interrupted,…

Fanuc Alarm 5302: ILLEGAL COMMAND IN G68 MODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A command to set the coordinate system is specified in the coordinate system rotation mode. Have you faced Fanuc Alarm 5302 ILLEGAL COMMAND IN G68 MODE on your machine? Share your experience or…

Fanuc Alarm 80: G37 ARRIVAL SIGNAL NOT ASSERTED Fanuc Control Model: Fanuc 0i-D/F, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description M series In the automatic tool length measurement function (G37), the measurement position reach signal (XAE, YAE,or ZAE) is not turned on within an area specified in parameter 6254 (value ε).This is due to a…