Fanuc Alarm 5445: CRC:MOTION IN G39

Fanuc Alarm 5060: ILLEGAL PARAMETER IN G02.3/G03.3 Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description There is a parameter setting error. Parameter No. 5641 (setting of the linear axis) is not set. The axis set in parameter No. 5641 is not a linear axis. Parameter No. 5642 (setting…

Fanuc Alarm 002: TV PARITY ALARM Fanus Control Model: 16i/18i/21i Description When a program is loaded into a CNC machine from a PC, laptop, or an old DNC device, the system checks the number of characters in each line and their order. If the TV Check parameter is turned on and the number of characters…

Fanuc Alarm 4532: IMPROPER U/V MACRO NUMBER Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The number of an inhibited macro (number beyond the range from 01 to 99) was specified in a U or V macro command. Have you faced Fanuc Alarm 4532 IMPROPER U/V MACRO NUMBER on…

Fanuc Alarm 402: SERVO ALARM: SV CARD NOT EXIST Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The axis control card is not provided. Have you faced Fanuc Alarm 402 SERVO ALARM: SV CARD NOT EXIST on your machine? Share your experience or troubleshooting tips in the comments below…

Fanuc Alarm 4602: ILLEGAL T-CODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The specified T command is not cataloged on the tool register screen. Have you faced Fanuc Alarm 4602 ILLEGAL T-CODE on your machine? Share your experience or troubleshooting tips in the comments below to help other…

Fanuc Alarm 5050: ILL–COMMAND IN CHOPPING MODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A command for switching the major axis has been specified for circular threading. Alternatively, a command for setting the length of the major axis to 0 has been specified for circular threading. Have…