Fanuc Alarm 5420: ILLEGAL PARAMETER IN G43.4/ G43.5

Fanuc Alarm 5400: SPL:ILLEGAL AXIS COMMAND Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description An axis specified for spline interpolation or smooth interpolation is incorrect. If an axis that is not the spline axis is specified in spline interpolation mode, this alarm is issued. The spline axis is…

Fanuc Alarm 5302: ILLEGAL COMMAND IN G68 MODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A command to set the coordinate system is specified in the coordinate system rotation mode. Have you faced Fanuc Alarm 5302 ILLEGAL COMMAND IN G68 MODE on your machine? Share your experience or…

Fanuc Alarm 14: ILLEGAL LEAD COMMAND Fanuc Series 0i (0i-TC, 0i-TD, 0i-TF) Fanuc Series 16i / 18i / 21i Fanuc Series 30i / 31i / 32i Description The wrong feed rate and lead limit of the (Threading) process is higher or lower than the limit set in the program, or there is an error in…

Fanuc Alarm 3: TOO MANY DIGITS Fanus Control Model: 16/18/21 Fanuc Alarm Description Data exceeding the maximum allowable number of digits was input. (Refer to the item of max. programmable dimensions.)

Fanuc Alarm 219: COMMAND G250/G251 INDEPENDENTLY Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description T series G251 and G250 are not independent blocks. Have you faced Fanuc Alarm 219 COMMAND G250/G251 INDEPENDENTLY on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC…

Fanuc Alarm 82: ILLEGAL MACRO STATEMENT Fanuc Control Model: Fanuc 0i-D/F, 16i/18i/21i, and 30i/31i/32i series Fanuc Alarm Description M series H code and automatic tool compensation (G37) were specified in the same block. (Automatic tool length measurement function) Modify the program. Have you faced Fanuc Alarm 82 H–CODE NOT ALLOWED IN G37 on your machine?…