Fanuc Alarm 5243: DATA OUT OF RANGE
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
The gear ratio is not set correctly. (This alarm is issued when flexible synchronization is turned on.)
Have you faced Fanuc Alarm 5243 DATA OUT OF RANGE on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 5064: DIFFERRENT AXIS UNIT (IS–B, IS–C) Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Circular interpolation has been specified on a plane consisting of axes having different increment systems. Have you faced Fanuc Alarm 5064 DIFFERRENT AXIS UNIT (IS–B, IS–C) on your machine? Share your experience or…
Fanuc Alarm 4650: IMPROPER G-CODE IN OFFSET MODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In the cutter compensation mode, an inhibited G code (pattern command, G73, G74, G75, etc.) was specified. Have you faced Fanuc Alarm 4650 IMPROPER G-CODE IN OFFSET MODE on your machine? Share your…
Fanuc Alarm 4509: ILLEGAL COMMAND IN CUT AT ANGLE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In a cut-at-angle (G89) command, the traveling pitch (Q) was set to zero, negative value, or another value larger than or equal to the length (I). Alternatively, I, J, P, or…
Fanuc Alarm 31: ILLEGAL P COMMAND IN G10 Fanus Control Model: Series 16i / 18i / 21i (Models A and B) and Series 30i / 31i / 32i Description When you use the ‘P’ command incorrectly with a G10 code. The value written after ‘P’ is either outside the offset number that is available in…
Fanuc Alarm 91: REFERENCE RETURN INCOMPLETE Fanuc Control Model: Fanuc 0i-D/F, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In the automatic operation halt state, manual reference position return cannot be performed. Have you faced Fanuc Alarm 91 REFERENCE RETURN INCOMPLETE on your machine? Share your experience or troubleshooting tips in the comments below to help…
Fanuc Alarm 5012: G05 P10000 ILLEGAL START UP Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Function category: High–precision contour control;Alarm details: G05 P10000 has been specified in a mode from which the system cannot enter HPCC mode. Have you faced Fanuc Alarm 5012 G05 P10000 ILLEGAL START…