Fanuc Alarm 5114: NOT STOP POSITION (G05.1 Q1)

Fanuc Alarm 401: SERVO ALARM: n–TH AXIS VRDY OFF Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The n–th axis (axis 1–8) servo amplifier READY signal (DRDY) went off. Refer to procedure of trouble shooting. Have you faced Fanuc Alarm 401 SERVO ALARM: n–TH AXIS VRDY OFF on your…

Fanuc Alarm 5010: END OF RECORD Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The end of record (%) was specified. I/O is incorrect. modify the program. Have you faced Fanuc Alarm 5010 END OF RECORD on your machine? Share your experience or troubleshooting tips in the comments below…

Fanuc Alarm 30: ILLEGAL OFFSET NUMBER Fanus Control Model: Series 0/16/18/21/30i/31i/32i Description This alarm occurs when the CNC control is commanded to use a Tool Offset Number that does not exist in the machine’s memory or exceeds the maximum limit defined by your system’s parameters. This problem is usually caused by incorrect use of T-codes…

Fanuc Alarm 4530: A/B MACRO NUMBER ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The number for storing and calling by an A or B macro was set to a value beyond the range from 1 to 5. Have you faced Fanuc Alarm 4530 A/B MACRO NUMBER…

Fanuc Alarm 5199: FINE TORQUE SENSING PARAMETER Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A parameter related to the fine torque sensing function is illegal.;· The storage interval is invalid.;· An invalid axis number is set as the target axis. Correct the parameter. Have you faced Fanuc…

Fanuc Alarm 5059: RADIUS IS OUT OF RANGE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A radius exceeding nine digits has been specified for circular interpolation with the center of the arc specified with I, J, and K. Have you faced Fanuc Alarm 5059 RADIUS IS OUT…