Fanuc Alarm 5085: SMOOTH IPL ERROR 1
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
A block for specifying smooth interpolation contains a syntax error.
Have you faced Fanuc Alarm 5085 SMOOTH IPL ERROR 1 on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 5229: WRITE PROTECTED Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A floppy disk in the built–in Handy File is write protected. Have you faced Fanuc Alarm 5229 WRITE PROTECTED on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC…
Fanuc Alarm 402: SERVO ALARM: SV CARD NOT EXIST Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The axis control card is not provided. Have you faced Fanuc Alarm 402 SERVO ALARM: SV CARD NOT EXIST on your machine? Share your experience or troubleshooting tips in the comments below…
Fanuc Alarm PS145: G10.1 TIME OUT Fanus Control Model: Fanuc Series 15 (specifically Model B) and sometimes the Series 10, 11, and 12 control systems. Description When the controller fails to receive a response within the time limit for a specific operation. If the G10.1 command is entered with an incorrect format or illogical values,…
Fanuc Alarm 5243: DATA OUT OF RANGE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The gear ratio is not set correctly. (This alarm is issued when flexible synchronization is turned on.) Have you faced Fanuc Alarm 5243 DATA OUT OF RANGE on your machine? Share your experience or…
Fanuc Alarm 5311: FSSB:ILLEGAL CONNECTION Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A connection related to FSSB is illegal. This alarm is issued when either of the following is found;1. Two axes having adjacent servo axis numbers (parameter No. 1023), odd number and even number, are assigned…
Fanuc Alarm 5031: ILLEGAL COMMAND (G100, G102, G103) Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description T series While a registration start command (G101, G102, or G103) was being executed, another registration start command was specified for the B–axis. Have you faced Fanuc Alarm 5031 ILLEGAL COMMAND (G100,…