Fanuc Alarm 5073: NO DECIMAL POINT
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
A decimal point is not specified for a command for which a decimal point must be specified.
Have you faced Fanuc Alarm 5073 NO DECIMAL POINT on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 92: AXES NOT ON THE REFERENCE POINT Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The commanded axis by G27 (Reference position return check) did not return to the reference position. Have you faced Fanuc Alarm 92 AXES NOT ON THE REFERENCE POINT on your machine?…
Fanuc Alarm 20: OVER TOLERANCE OF RADIUS Fanus Control Model: 16/18/21 Fanuc Alarm Description In circular interpolation (G02 or G03), difference of the distance between the start point and the center of an arc and that between the end point and the center of the arc exceeded the value specified in parameter No. 3410.
Fanuc Alarm 9: ILLEGAL ADDRESS INPUT Fanus Control Model: 16/18/21 Fanuc Alarm Description Unusable character was input in significant area. Modify the program.
Fanuc Alarm 5057: M–NET BOARD SYSTEM DOWN Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Transmission timeout error (parameter No. 177) ROM parity error CPU interrupt other than the above Have you faced Fanuc Alarm 5057 M–NET BOARD SYSTEM DOWN on your machine? Share your experience or troubleshooting tips…
Fanuc Alarm 5242: ILLEGAL AXIS NUMBER Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The axis number of the synchronous master axis or slave axis is incorrect. (This alarm is issued when flexible synchronization is turned on.) Alternatively, the axis number of the slave axis is smaller than…
Fanuc Alarm 67: CAN NOT ERROR IN MDI MODE Fanus Control Model: 16/18/21 Fanuc Alarm Description T Series;G70, G71, G72, or G73 command with address P and Q. Modify the program.