Fanuc Alarm 5061: ILLEGAL FORMAT IN G02.3/G03.3

Fanuc Alarm 5430: ILLEGAL COMMAND IN 3–D CIR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In a modal state in which three–dimensional circular interpolation cannot be specified, a three–dimensional circular interpolation (G02.4/G03.4) is specified. Alternatively, in three–dimensional circular interpolation mode, a code that cannot be specified is…

Fanuc Alarm 85: COMMUNICATION ERROR Fanuc Control Model: Fanuc 0i-D/F, 16i/18i/21i, and 30i/31i/32i series Fanuc Alarm Description When entering data in the memory by using Reader / Puncher interface,an overrun, parity or framing error was generated. The number of bits of input data or setting of baud rate or specification No. of I/O unit is…

Fanuc Alarm 4703: PROGRAM ERROR (OT –) Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The value specified in the Y-axis move command exceeded the negative value of stored stroke limit 1. (Advance check) Have you faced Fanuc Alarm 4703 PROGRAM ERROR (OT –) on your machine? Share your…

Fanuc Alarm 118: PARENTHESIS NESTING ERROR Fanus Control Model: 16/18/21 Fanuc Alarm Description The nesting level of brackets or parentheses in a macro expression exceeds the limit of 5 levels.

Fanuc Alarm 5053: M–NET CONNECT ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Connection time monitoring error (parameter No. 175) Have you faced Fanuc Alarm 5053 M–NET CONNECT ERROR on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and…