Fanuc Alarm 5004: HPCC NOT READY
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i
(M series)
High–precision contour control is not ready.
Have you faced Fanuc Alarm 5004 HPCC NOT READY on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 5416: NURBS:ILLEGAL MODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A mode that cannot be used with NURBS interpolation mode is specified in NURBS interpolation mode. Have you faced Fanuc Alarm 5416 NURBS:ILLEGAL MODE on your machine? Share your experience or troubleshooting tips in the comments…
Fanuc Alarm 5455: ILLEGAL ACC. PARAMETER Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A permissible acceleration parameter for optimum torque acceleration/ deceleration is incorrect. The cause is one of the following;1) The ratio of the deceleration rate to the acceleration rate is below the limit.;2) The time…
Fanuc Alarm 5007: TOO LARGE DISTANCE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In the HPCC mode, the machine moved beyond the limit. Have you faced Fanuc Alarm 5007 TOO LARGE DISTANCE on your machine? Share your experience or troubleshooting tips in the comments below to help other…
Fanuc Alarm 5139: FSSB: ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Servo initialization did not terminate normally. The optical cable may be defective, or there may be an error in connection to the amplifier or another module. Check the optical cable and the connection status. Have…
Fanuc Alarm 5432: G02.4/G03.4 FORMAT ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A three–dimensional circular interpolation command (G02.4/G03.4) is incorrect. Have you faced Fanuc Alarm 5432 G02.4/G03.4 FORMAT ERROR on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators…
Fanuc Alarm 118: PARENTHESIS NESTING ERROR Fanus Control Model: 16/18/21 Fanuc Alarm Description The nesting level of brackets or parentheses in a macro expression exceeds the limit of 5 levels.